Ultrasonic Flowmeter Measuring Liquid Flow in Fully Pipe

CX-2000F-D Ultrasonic Flowmeter Duct Type Flowmeter

The Chuangxin's ultrasonic flowmeter Duct Type Flowmeter has  multiple power supply modes: a single 3.6V lithium battery can work for 6 years, using two-wire systems 4~20mA, RS232, RS485 output type, without battery can also work normally;

The Chuangxin's ultrasonic flowmeter Duct Type Flowmeter has rich measurement content: cumulative flow, cumulative heat, instantaneous flow, instantaneous heat, water supply and return temperature, current temperature difference, fault running time, working state, date, time, etc.can be cyclic displayed ;

The Chuangxin's ultrasonic Flowmeter Duct Type Flowmeter has a high level of protection : the protection level can reach IP68, can operate in 2 meters underwater;

It has a strong structure: The measuring pipe section adopts precision casting process, no leakage, no pressure loss and no moving parts, ten years maintenance-free design.

It  has a humanized design: magnetic rod operation,  internal double buttons, easy to operate; fault self-diagnosis.

It has common metal pipes such as carbon steel, stainless steel, cast iron, copper, aluminum, etc.

And it also has other non-metallic pipes such as PVC, PR, FRP, cement and other pipes.

It has  high precision, wide range ratio, low cost, simple installation, small pressure loss and no mechanical moving parts.

It is mounted with imported integrated circuit , and all the circuit is digitized and integrated, which improves measurement accuracy and greatly reduces fault maintenance.

Chuangxin's ultrasonic Flowmeter Duct Type Flowmeter is widely used in the industrial field of all kinds of liquid flow online measurement.

Chuangxin's Ultrasonic Flowmeter Duct Type Flowmeter has  the following features:

1. Protection level: Host: IP68   /  Sensor: IP68

2. Temperature: host: -20~60℃  Sensor: -30~60℃

3. Accuracy: less than 1%

4. Flow rate range: 0~±10m/s, forward and reverse bidirection measurement

5. Pipe diameter: DN32~DN600mm

6. Fluid temperature: -30~160℃

7. Fluid type: water, seawater, sewage, acid-alkali solution, alcohol, beer, all kinds of oil and other

                       single symmetrical liquid that can conduct ultrasonic waves

8. Pipe material: steel, stainless steel, cast iron, copper, PVC, aluminum, glass steel and other dense pipe, lining is allowed

9. Signal output :1 loop current output of 4~20mA, 1 loop OCT pulse output, 1 loop relay output

10. Signal input: 3 loops 4~20mA current input, to be the data collector to connect three-wire PT100 platinum resistor, to achieve heat measurement

11. Communication interface: isolated RS485 serial interface , supporting MODBUS protocol

12. Power supply: DC8-36V or AC10-30V,  AC85-264V, with waterproof power adapter