Thermal Water Vortex Flowmeter
(Total 1 Products)-
Unit Price:260~880USDBrand:CXMin. Order:1 Set/SetsModel No:CXLUGBTransportation:Ocean,Land,Air,ExpressPackaging:Standard Export Plywood CaseSupply Ability:900 set per monthPlace of Origin:ChinaProductivity:800 sets per monthThe Thermal Water Vortex flowmeter is developed according to the Karman vortex principle, and is used to measure the volume flow of gas, steam or liquid, and the volume flow or mass flow of standard conditions. The differential pressure technology...
A Thermal water vortex flow meter is typically made of 316 stainless steel or Hastelloy and includes a bluff body, a vortex sensor assembly, and the transmitter electronics – although the latter can also be mounted remotely.Vortex meters can be used to measure thermal water.
The main advantages of thermal water vortex flowmeters are their low sensitivity to changes in process conditions and low wear relative to orifices or turbine meters. Initial and maintenance costs are also low. For these reasons, thermal water vortex meters have been gaining wider acceptance among users.
Vortex Flowmeter
A vortex flow meter is typically made of 316 stainless steel or Hastelloy and includes a bluff body, a vortex sensor assembly, and the transmitter electronics – although the latter can also be mounted remotely (Figure 2). They are typically available in flange sizes from ½ in. to 12 in. The installed cost of vortex meters is competitive with that of orifice meters in sizes under six inches. Wafer body meters (flangeless) have the lowest cost, while flanged meters are preferred if the process fluid is hazardous or at a high temperature.
Please Leave Us A Message or contact us via email
Tel/Whatsapp/Wechat: +86 139 3909 2376 Email: sales01@kfcxflowmeter.com;
Send Inquiry Now