Kaifeng Chuangxin Measurement & Control Instrument Co., Ltd.
Payment Type:T/T
Incoterm:FOB,CFR,CIF,EXW,FCA
Min. Order:1 Set/Sets
Transportation:Ocean,Land,Air,Express
Port:Shanghai,Guangzhou,Shenzhen
$280-380 /Set/Sets
Brand: CX
Place Of Origin: China
Display Method: Analog And Digital
Packaging: standard export case
Productivity: 900 sets per month
Transportation: Ocean,Land,Air,Express
Place of Origin: China
Supply Ability: 900 sets per month
Certificate: iso9001:2015
HS Code: 9026100
Port: Shanghai,Guangzhou,Shenzhen
Payment Type: T/T
Incoterm: FOB,CFR,CIF,EXW,FCA
Stainless steel Vortex flow meters are best suited for flow measurements where the introduction of moving parts presents problems. They are available in industrial grade, brass, or all plastic construction.
Sensitivity to variations in the process conditions are low and, with no moving parts, relatively low wear compared to other types of flow meters.
On the side of the bluff body where the vortex is being formed, the fluid velocity is higher and the pressure is lower. As the vortex moves downstream, it grows in strength and size, and eventually detaches or sheds itself. This is followed by a vortex’s being formed on the other side of the bluff body (Figure 1). The alternating vortices are spaced at equal distances.
A Vortex Flow Meter is typically made of 316 stainless steel or Hastelloy and includes a bluff body, a vortex sensor assembly, and the transmitter electronics – although the latter can also be mounted remotely (Figure 2). They are typically available in flange sizes from ½ in. to 12 in. The installed cost of vortex meters is competitive with that of orifice meters in sizes under six inches. Wafer body meters (flangeless) have the lowest cost, while flanged meters are preferred if the process fluid is hazardous or is at a high temperature.
Contact Now