Kaifeng Chuangxin Measurement & Control Instrument Co., Ltd.
Business Type:Manufacturer , Trade Company
Main Markets: Africa , Americas , Asia , Caribbean , East Europe , Middle East , North Europe , Oceania , Other Markets
Exporter:1% - 10%
Certs:ISO14001, ISO9001, CE, Test Report
Description:Sewage Water Electromagnetic Flow Meter,Electromagnetic Flowmeter Split Type,Seperated Type Electromagnetic Flowmeter
Payment Type:T/T
Incoterm:FOB,CFR,CIF,EXW,FCA
Min. Order:1 Set/Sets
Transportation:Ocean,Land,Air,Express,Express
Port:Qingdao,Shanghai,Tianjin
$268-588 /Set/Sets
Model No.: CXLD
Brand: CX
Place Of Origin: China
Display Method: Analog And Digital
Packaging: Standard Export Case
Productivity: 500set/month
Transportation: Ocean,Land,Air,Express,Express
Place of Origin: China
Supply Ability: 600sets per month
Certificate: ISO9001:2015
HS Code: 9026100
Port: Qingdao,Shanghai,Tianjin
Payment Type: T/T
Incoterm: FOB,CFR,CIF,EXW,FCA
Kaifeng Chuangxin' Electromagnetic flow meter is composed of sensor and converter. It comes in two forms: compact-type and remote-type. The remote-type also requires a special double-layer shielded cable to connect the converter and sensor. There are seven types of electrode materials and four types of lining materials available for sensors.
The measurement principle of electromagnetic flow meter is based on Farady's electromagnetic induction law. The sensor is mainly composed of measuring tubes with isolate lining, a pair of electrodes installed by penetration of the measuring tube wall, a pair of coils and an iron core to produce a working magnetic field.
Features:
Ø Not affected by fluid density, viscosity, temperature, pressure and conductivity;
Ø No moveable parts in the measuring tube, no pressure loss, and lower requirements for straight pipe sections.
Ø Bidirectional measurement system with three built-in totalizers, forward total, reverse total and difference total;
Ø Display forward and reverse flow, multiple outputs: current, pulse, digital communication, HART;
Ø Reasonable selection materials of liner and electrode, excellent corrosion resistance and wear resistance;
Ø Excitation mode converter with low power consumption, stable zero point and high accuracy.
Ø Using surface mount technology (SMT), with self-test and self-diagnosis alarm output, empty load detection alarm output, flow rate upper and lower limit alarm output, batch control and other functions.
Ø Through infrared touch buttons, parameter setting is convenient and programming is reliable.
Item | The Specifications of Electromagnetic Flowmeter |
Installation Type | Split/remote |
Measuring fluid | conductive fluid and slurry |
Caliber | DN6-DN3000 |
End connection | Flange, threaded, clamping, insertion type, etc. |
Electrode materials | Mo2Ti , Hastelloy C, Hastelloy B, Pt Ta Ti |
Flange standard | GB, DIN, JIS, EN, SABS, etc. |
Lining Material | PTFE, PFA (resistance to negative pressure), chloroprene rubber, polyurethane, hard rubber (optional conductive ground rubber), F46 |
Electrode Type | Standard type 316L, scraper-type (DN ≥ 50) |
Dielectric conductivity | ≥5μs/cm (water≥ 20μs/cm) |
Accuracy grade | ±0.5% RS. |
Flow Range | 0-10m/s |
Maximum temperature of medium | For rubber liner ≤ 80 °C, for PTFE liner ≤ 120°C |
Ambient temperature | -20 - +60 |
Working pressure | 0.6Mpa-4.0Mpa, the special high rpressure is available |
Protection Level | IP65, IP67, IP68 (optional) |
Power | 220VAC(85~250 voltage) 24VDC(11~40 voltage) |
Display | Forward and backward instantaneous flowrate, total flow, velocity, flowrate percentage with back light |
Output | 4-20mA current output ,0-1kHz frequency output, pulse output per unit volume |
Communication | RS485 and Modbus, RS232 and Modbus, HART, Profibus, GPRS, etc. |
Widely used in petroleum, chemical industries.
Resist against oxidable acids, alkali and non-oxidable salts. For instance, vitriol, phosphate, hydrofluoric acids, and organic
acids.
For example, Fe+++, Cu++, Nitric acids, mixed acids
fuming nitric acids), organic acids, and alkali.
Not resistant to high purity reducing acids such as sulphuric acids, hydrochloric acids.
Applicable to all chemical mediums except Hydrofluoric Acids, Oleum and Alkali.
Liner material Main performances Applicability Polytetrafluoroethylene (PTFE) 1.It is a plastic material with the stablest Chemical properties, resist the corrosion of Boiling Hydrochloric acid, sulfuric acid, nitric acid, aqua regia, Concentrated alkali and many kinds of organic solvent, unable to resist the corrosion of chlorine trifluoride, high Temperature vanadyltrifluoride, high flow-rate liquid fluorine, liquid oxygen and ozon; 2.Poor abrasion resistance; 3.Poor ability of anti-negative pressure. 1.100℃,150℃(special order required); 2.Strong corrosive medium like concentrated acid , alkali, etc.; 3.Sanitary medium. Polychloroprene rubber (Neoprene) 1.Excellent elasticity, high degree of tensile strength,good wear resistance; 2.Able to resist the corrosion of generally low concentration acid, alkali and salt, unable to resist that of the oxidative medium. 1.80℃,120℃(special order required); 2.General water, polluted water, weak wear ability mud and ore pulp. Polyurethane rubber (PU) 1.Excellent wear resistance (ten times of the natural rubber’s); 2.Poor abrasion resistance of acid and alkali; 3.Not able to work with water mixed with organic solvent. 1.<80℃; 2.Middle and strong wear ability ore pulp, coal pulp, mud, etc.. PFA Having the same abrasion resistance with PTFE.Having strong ability of load pressure resistance. 1.Below 220℃ 2.Applicable in state of load pressure. F46 1.Have the same abrasion resistance with PTFE. 2.Resistable for low abrasion. 3.Having strong resistance to load pressure. 1.Below 220℃ 2.The same as PTFE. 3.Applicable in mediums of low abrasion.