Kaifeng Chuangxin Measurement & Control Instrument Co., Ltd.
Business Type:Manufacturer , Trade Company
Main Markets: Africa , Americas , Asia , Caribbean , East Europe , Middle East , North Europe , Oceania , Other Markets
Exporter:1% - 10%
Certs:ISO14001, ISO9001, CE, Test Report
Description:Real Gas Mass Flow Meter,Plug-in Gas Flow Meter,Insertion Gas Mass Flow Meter
Payment Type:L/C,T/T,D/P,D/A,Paypal,West Union
Incoterm:FOB,CFR,CIF,EXW,FCA,DEQ,DDP,DDU,Express Delivery
Min. Order:1 Set/Sets
Transportation:Ocean,Land,Air,Express
Port:Shanghai,Qingdao,Tianjin
$386-659 /Set/Sets
Model No.: KCMC-Gas mass flowmeter
Brand: KCMC
Place Of Origin: China
Display Method: Analog And Digital
Packaging: Standard Export Paper or Plywood Carton
Productivity: 100Sets per month
Transportation: Ocean,Land,Air,Express
Place of Origin: China
Supply Ability: 60 set per week
Certificate: ISO9001:2015
HS Code: 9026100
Port: Shanghai,Qingdao,Tianjin
Payment Type: L/C,T/T,D/P,D/A,Paypal,West Union
Incoterm: FOB,CFR,CIF,EXW,FCA,DEQ,DDP,DDU,Express Delivery
Insertion Thermal Gas Mass Flowmeter Thermal Gas Mass Flow Meter Co2 Mass Flowmeter
The thermal gas mass flowmeter is designed based on the principle of thermal diffusion.
The meter contains two platinum resistance temperature sensors. The thermal principle operates by monitoring the cooling effect of a gas stream as it passes over a heated sensor. Gas flowing through the sensing section passes over two sensors one of which is used conventionally as a temperature sensor, whilst the other is used as a heater. The temperature sensor monitors the actual process values whilst the heater is maintained at a constant differential temperature above this by varying the power consumed by the sensor. The greater the gas velocity, the greater the cooling effect and power required to maintain the differential temperature. The measured heater power is therefore a measure of the gas mass flow rate.
Description | Specifications |
Measuring Medium | Various gases (Except the acetylene) |
Pipe Size | DN10~DN4000mm |
Velocity | 0.1~100 Nm/s |
Accuracy | ±1~2.5% |
Working Temperature | Sensor: -40℃~+220℃ Transmitter: -20℃~+45℃ |
Insertion Sensor: medium pressure≤ 1.6MPa Flanged Sensor: medium pressure≤ 1.6MPa Special pressure please contact us | |
Power Supply | 24VDC or 220VAC |
Response Time | 1s |
Output | 4-20mA (optoelectronic isolation, maximum load 500Ω), Pulse, RS485 (optoelectronic isolation) and HART |
Alarm Output | 2 line Relay, Normally Open state, 3A/30V/DC |
Sensor Type | Standard Insertion, Hot-tapped Insertion and Flanged |
Construction | Compact and Remote |
Pipe Material | Carbon steel, stainless steel, plastic, etc |
Display | 4 lines LCD Mass flow, Volume flow in standard condition, Flow totalizer, Velocity, etc. |
Protection Class | IP65 |
Sensor Housing Material | Stainless steel (304/316) |
Thermal gas mass flowmeter Features
Measuring the mass flow or volume flow of gas
Do not need to do temperature and pressure compensation in principle with accurate measurement and easy operation.
Wide range: 0.5Nm/s~100Nm/s for gas. The meter also can be used for gas leak detection
Good vibration resistance and long service life. No moving parts and pressure sensor in transducer, no vibration influence on the measurement accuracy.
Easy installation and maintenance. If the conditions on site are permissible, the meter can achieve a hot-tapped installation and maintenance. (Special order of custom-made)
Digital design, high accuracy and stability
Configuring with RS485 or HART interface to realize factory automation and integration